FPGA Integrated Optofluidic Biosensor for Real-Time Single Biomarker Analysis.

Integrated optofluidic biosensors can fill the need for sensitive, amplification-free, multiplex single molecule detection which is relevant for containing the spread of infectious diseases such as COVID-19. Here, we demonstrate a rapid sample-to-answer scheme that uses a field programmable gate array (FPGA) to enable live monitoring of single particle fluorescence analysis on an optofluidic chip. Fluorescent nanobeads flowing through a micro channel are detected with 99% accuracy and particle concentrations in clinically relevant ranges from 3.4×104 to 3.4 × 106/ml are determined within seconds to a few minutes without the need for post-experiment data extraction and analysis. In addition, other extract salient experimental parameters such as dynamic flow rate changes can be monitored in real time. The sensor is validated with real-time fluorescence detection of single bacterial plasmid DNA at attomolar concentrations, showing excellent promise for implementation as a point of care (POC) diagnostic tool.

Free-Space Excitation of Optofluidic Devices for Pattern-Based Single Particle Detection.

Optofluidic sensors have enabled single molecule sensing using planar, waveguide dependent multi-spot fluorescence excitation. Here, we demonstrate a new approach to single-particle fluorescence sensing using free-space, top-down illumination of liquid-core antiresonant reflecting optical waveguide (ARROW) devices using two different multi-spot excitation techniques. First, the liquid core ARROW waveguide is excited with a focused beam through a slit pattern milled into an opaque aluminum film, showing comparable performance for single bead fluorescence detection as in-plane, multi-mode interference waveguide based excitation. The second top-down illumination technique images the spot pattern from a Y-splitter SiO2 waveguide chip directly onto the detection device for efficient power utilization and circumventing the need for an opaque cover, producing a further 2.7x improvement in signal-to-noise ratio. The two top-down approaches open up new possibilities for chip-based optical particle sensing with relaxed alignment tolerances.

Performance Comparison of Flow-Through Optofluidic Biosensor Designs.

Optofluidic flow-through biosensors are being developed for single particle detection, particularly as a tool for pathogen diagnosis. The sensitivity of the biosensor chip depends on design parameters, illumination format (side vs. top), and flow configuration (parabolic, two- and three-dimensional hydrodynamic focused (2DHF and 3DHF)). We study the signal differences between various combinations of these design aspects. Our model is validated against a sample of physical devices. We find that side-illumination with 3DHF produces the strongest and consistent signal, but parabolic flow devices process a sample volume more quickly. Practical matters of optical alignment are also discussed, which may affect design choice.

Optofluidic Flow-Through Biosensor Sensitivity - Model and Experiment.

We present a model and simulation for predicting the detected signal of a fluorescence-based optical biosensor built from optofluidic waveguides. Typical applications include flow experiments to determine pathogen concentrations in a biological sample after tagging relevant DNA or RNA sequences. An overview of the biosensor geometry and fabrication processes is presented. The basis for the predictive model is also outlined. The model is then compared to experimental results for three different biosensor designs. The model is shown to have similar signal statistics as physical tests, illustrating utility as a pre-fabrication design tool and as a predictor of detection sensitivity.

Highly nonlinear polarization-maintaining photonic crystal fiber with nanoscale GaP strips.

A highly birefringent silica photonic crystal fiber (PCF) is proposed with nanoscale gallium phosphide strips at the core and modified spiral cladding air hole distribution. Optical properties of the PCF are simulated using the finite element method. Significant influences of low-refractive-index slot region confinement and high-index strips confinement are observed for two different modes. This introduces a high birefringence of ∼0.58 at 1.55 µm wavelength. Moreover, a high nonlinearity coefficient of the order of ∼104 W-1 km-1 is achieved in the wavelength range from 1.4 to 1.7 µm. The proposed fiber will find promising applications in coherent optical communications and sensing applications.